Form Letter for European users
Original writing : 31 March 1995
Latest revision: 20 February 2017
Dear ATP EMTP-interested party:
The form letter now being read is a specially-modified version of the North American form letter
LICENSE.ZIP. It is used in Europe to license and distribute ATP materials with the approval of:
Co-Chairmen of Canadian/American EMTP User Group
Dr. W. Scott Meyer Dr. Tsu-huei Liu
3179 Oak Tree Court
West Linn, Oregon 97068
USA The Alternative Transients Program (ATP) is the most widely used version of the Electromagnetic
Transients program ( EMTP ) in the world today --- by far! In no small part, the acceptance of ATP is
due to its availability to nearly everyone in the world free of royalty, and its compatibility with the
computers of most common interest.
EMTP was developed in the public domain at BPA (the Bonneville Power Administration) prior to the
commercial initiative in 1984 by DCG (the EMTP Development Coordination Group, with which BPA
has had no connection since expiration of the associated agreement on the last day of 1987) and
EPRI (the Electric Power Research Institute of Palo Alto, California, USA). Whereas BPA work on
EMTP remains in the public domain by U.S. law (FOIA, the Freedom of Information Act), ATP is not in
the public domain. It is, however, available free of all charge to anyone in the world who has not
participated voluntarily in the sale or attempted sale of any electromagnetic transients program
(hereafter called "EMTP commerce"). Those who have engaged in EMTP commerce, but now wished
they had not, may contact the Can/Am user group to learn about conditions of possible pardons.
Membership in EPRI, CEA, or CRIEPI (the latter two being DCG members) does not, by itself,
disqualify any organization from access to ATP, it is important to note. Nor does use of the DCG/EPRI
EMTP that is licensed and distributed by EPRI. This is the significance of the adverb "voluntarily."
Clearly, few if any EMTP users control the high-level politics that are associated with membership in
national organizations such as EPRI, CEA, or CRIEPI, so membership alone will not be held against
anyone. No problem exists provided no significant resources (e.g., money, technical advice, computer
work, advertizing) have been contributed directly to the joint DCG/EPRI commercial project.
Commercial competitors no longer are excluded from access to ATP. This is a big change from earlier
years. As explained in the January, 1992, issue of the newsletter (story on pages 8-9), the Can/Am
user group has decided to approve the disclosure of ATP to, and use by, any commercial developer of
any competing electromagnetic transients program on the same terms as work of that commercial
developer is made available to the general community of ATP users. This is reciprocity.
MS Windows is used by the average Intel-based PC, and ATP is generally compatible. Salford DBOS
should work with Win 3.x, Win95 and Win98, but not WinNT. For WinNT, Win2000 and Windows XP
use either GNU Mingw32 ATP or Watcom ATP (the same executable runs correctly under Windows
95, 98, too). GNU ATP for Linux is yet another alternative for Intel PCs.
Each authorized user of ATP must agree not to disclose any ATP information to unauthorized persons
and / or organizations. A non-disclosure agreement to this effect must be signed by each potential
user, and approved by the user group, before access to ATP information will be granted. The form is
attached as sheet number 2 of this letter.
The sharing of ATP materials among authorized users is encouraged. If one authorized user has
newer or better materials than a second, the first user is encouraged to share with the second.
Consultants and manufacturers who want to use ATP are encouraged to do so provided there is no
misrepresentation, particularly to customers. In the case of commercial design and / or consulting, this
means that clients or potential clients must be notified prominently, and at the earliest opportunity,
about the EMTP version that is being used (ATP), its royalty-free nature, and who licenses its use. If
the name DCG or EPRI is mentioned along with EMTP, it must be explained that ATP has no
connection with the commercial product that is licensed by EPRI. Passing this form letter to a client is
an easy way of informing him.
Education is another activity that can profit from ATP use, but only if several rules are carefully
followed. First, there must be no misrepresentation of ATP (same requirement as the preceding
paragraph) to potential students in any advertizing for the course. Second, prior to the disclosure of
any ATP materials to any student, that student must be supplied with a copy of this form letter, he
must submit licensing, and his application must be officially validated. Third, regarding access to ATP,
all course faculty are subject to the same restrictions as students. If printed advertising for a course
mentions ATP, it is strongly recommended that wording be checked with the user group prior to
reproduction in order to avoid any possible misrepresentation.
Licensing to use ATP is free of all charge for all who have not engaged in EMTP commerce. Once one
is licensed, he is authorized to obtain ATP materials from anyone (sharing among users is
encouraged). E.g., any ATP-licensed person in the world can acquire materials from the European
EMTP-ATP Users Group e.V. (EEUG), which is a registered association according to German law.
BPA is cooperating with the Can/Am user group for the noncommercial development and use of ATP,
readers are reminded. As an agency of the U.S. government, BPA is accessible to the general public,
and BPA performs some services that are valuable to the EMTP community. For example, BPA
shares EMTP information with both foreign EMTP user groups and selected cooperating individual
program developers and users. All inquiries about EMTP (nothing else, please!) can be addressed to:
Tsu-huei Liu or W. Scott Meyer
P.O. Box 3621
Portland, Oregon 97208
E-mail (Internet): email@example.com
Can/Am EMTP News is the name of the quarterly newsletter of the user group. The issues are dated
January, April, July, and October, and all lengths since 1993 have been 20 pages. The newsletter is
available free of charge to anyone, whether ATP licensed or not. Disk files began as WordPerfect 5.1
format, but later were switched to MS Word (.DOC files). Finally, only Adobe PDF (Portable Document
Format) files are released to the general public. These are readable using the free Adobe Acrobat
Reader (click on yellow "Get Acrobat Reader" button of www.adobe.com/acrobat on the Web).
Newsletters are available from several storage sites on the Internet such as the web site of the
European EMTP-ATP Users Group (www.eeug.org) or on the campus of Kyoto University in Kyoto,
operated by the Japanese ATP User Group (www.jaug.jp). Finally, the European user group EEUG
operates a free electronic bulletin board using address firstname.lastname@example.org maintained by the
University of Applied Sciences in Osnabrueck, Germany (see later mention). This is for ATP-related
announcements, questions, answers, etc. The EEUG publishes quarterly the EEUG News, which
contains besides technical papers, reader's corner and hints for program usage.
Dynamic dimensioning allows actual table space of ATP to be fixed by the user at the start of
execution within some very large limits. This began in mid-October of 1993. Previously, table sizes
were fixed as the program was linked, resulting in names such as TP3 or TP20. These are history.
Now, the single TPBIG.EXE satisfies most users.
Object files are available for those who have acquired the free GNU FORTRAN compiler g77. Object
files are more flexible because they permit: 1) modification of limiting table sizes; 2) the connection of
user-supplied source code; 3) compiled TACS; and 4) selective correction of program errors. For
further details, consult the JAUG (Japanese ATP User Group) storage at Kyoto University and
Kisarazu National College of Technology. This, in turn, requires a password that is available from the
EEUG Association for users licensed by the EEUG.
Other computers (not Intel-based) are compatible with ATP. In fact, almost any modern computer of
practical interest has been proven to be compatible (more than 30 distinct systems have been tested).
ATP is supported on other computers in various places. For members of EEUG, the transfer can be
arranged by the user group. Others are referred to the Can/Am user group.
c/o Prof. Dr.-Ing. Harald Wehrend
University of Applied Sciences Kiel
Faculty of Computer Science and Electrical Eng.
D-24149 Kiel, Germany
Voice phone: +49 431 210-4197
Fax phone: +49 431 210-64197
EEUG Web page: http://www.eeug.org
It is recommended to print this form letter for your own records before proceeding with the
ATP licensing agreement or EEUG order form.
If the preceding form letter has not yet been read carefully, do this before proceeding. Should
any detail be unclear after reading, contact the user group for clarification prior to the
submission of an application for free ATP licensing (next). To order ATP materials from the
EEUG, ATP licensing is necessary.